Painting of permanent protection

for inside and outside - solvent-free

poison-class-free dyed wood oil on nature basis

Characteristics:

The dyed PNZ COLOUR OIL is used after decades old traditional prescriptions with outstanding depth
impregnation for colour for all wood. Simultaneous dyeing and oiling facilitates the processing step, is usually sufficient a painting. Well compatibly to the renovation for all caked-on Alta lines, double productivity opposite conventional glazes. Outstanding cross-linking characteristics and clearly longer durability by nano-particles, therefore high UV protection, drip-restrained, flexibly and humidity-adjusting. Tear -, pouring and decrease behaviour are decreased.

Areas of use:

Premium painting for the refinement of domestic and exotic woods with new and renovation work. For inside and outside. Solvent-freely on oil basis. For all woods, like windows, window shops, cladding carpeting, framework, doors, fences, profiled wood, balconies, garage gates, furniture, cork, floors and summer-houses.
Also for apiary, stables and as toy colour suitably. Outstanding painting of renovation. After drying process food-genuinly.

Usage:

Capers, squirt or roll. The wood must be grease-free cleanly, drying (under 18%) and. Old, still basic painting can be re-painted over usually. Pre-treat during mushroom endangerment with PNZ-BARRIEPRIMER or PNZ BORON IMPREGNATION. PNZ COLOR OIL well stir up, (processing temperature over +8°C). In order to obtain an optimum durability and a UV protection, 1 - 2 painting should be made. Inside 1 painting. Use colourless only in connection with coloured painting for outside, since colourless offers no sufficient UV protection. In the box the oil is milky, dries however in the indicated colour up. All colours are among themselves mixable. With bright painting colour copies of wood contents materials (also with impregnated wood) can occur. Such copies can be isolated with PNZ-BARRIERPRIMER for wood and cork (e.g. oak, larch, zeder, Teak, OSB plates, etc.). In the floor board area a colourless painting with PNZ COLOR OIL nature, PNZ HARD-WAX-OIL, PNZ-FLOOR-VARNISH, etc. should be used for the abrasion protection of the pigments after the coloured surface. Affects the different surfaces differently. Test paint coat is absolutely necessary therefore.

Drying time:

6 - 24 hours, verb lure-free depending upon temperature and air humidity. After dust drying approx. 1 hour.
Overlineable also in the dried condition after 2 - 6 hours. In wet-cold weather the drying time can retard. 

Coverage:

1 Litre for approximately 20 m² per coat and more. These specifications are intended as guidelines. The precise amount depends on the wood type and colour intensity and must be ascertained by testing.

Storage:

Cool and frost-free, seal can tightly.

Cleaning:

Clean tools with soapy water or PNZ-SPEZIALVERDÜNNUNG (PNZ-SPECIAL-THINNER).

Note:

The usage of several bundles with different batch numbers do mix these in a larger case! Agitate forwards and during the use contents well.

Colours:

1 colourless, 2 chalk white, 3 larch, 4 dark oak, 5 meranti/teak, 6 merbau, 7 bamboo/limba, 8 light oak, 9 rape yellow, 10 poppy red, 11 graphite black, 12 petrol blue, 13 silver grey, 14 pastel green, 15 crystal blue. All colours may be mixed with each other. Covering tones can be converted by addition from colourless into translucent tones.

Contents:

Enhanced nature oils, like tungreeoil, wood -, thistle -, soy bean- and sun flower oil, Damar, Aqua, (with coloured oil: Ferric oxide pigments, titanium white, organic pigments, for the food sector freely given), zirconium and cobalt soaps.

Certification:

GGVS and Vbf are void. Poison-class-freely, DIN 53160-Teil C/EN 71 solvent-freely. With difficulty
inflammable after tl A - 053, behaviour in case of fire according to DIN 4102, class B2. UBA 26010024.

Sizes:

0.75 litre, 2.5 litre, 10 litre, and larger